Baby-trend Flex-Loc Infnat Car Seat CSO190AD809 Manuel d'utilisateur

FLEX-LOC INFANT CAR SEATConvenience through innovation and thoughtful designwww.babytrend.comKEEP INSTRUCTIONS FOR FUTURE USE.Carefully read and under

from the surface that the seat is on as well as from the pressure on their chest from the safety harness. In addition, if the carrier is placed too

• Strings and cords can cause strangulation:- DO NOT place items with string around a child’s neck, such as hood strings, pacier cords, etc.- DO NOT

SELECTING THE BEST LOCATION FOR THE SAFETY SEAT4.0 LOCATIONNot every location within an automobile may be safe for the installation of this Safety Sea

4.0 LOCATION• If the driver is the only adult in the vehicle and the child requires constant monitoring, then the forward seating position may be use

14• DO NOT place this Safety Seat in any vehicle seat that faces to the rear or to either side of the vehicle. (Fig. 14-1 & 14-2).• DO NOT use t

154.0 LOCATIONfor use with the Safety Seat. Even newer vehicles can have seat belts systems that are not safe for use with the Safety Seat. These sy

• DO NOT use a lap belt that stays loose after installed and locks only in a crash or sudden stop. These lap belts utilize an Emergency Locking Retr

• DO NOT use a seat belt that is anchored on the seat more than 2 inches forward of the crease between the seat bottom and the seat back. This type

Seat belt systems that are Adequate for use with the Safety Seat: The following seat belt systems can be used with the Safety Seat provided, that all

loosening. This combination seat belt does not require a locking clip (Fig. 19-1).• A lap/shoulder combination belt system with a latch plate that

TABLE OF CONTENTSWARNINGS TO ALERT YOU TO POSSIBLE DANGERS ... 4HOW TO REGISTER YOUR SAFETY SEAT ...

205.0 FEATURESSAFETY SEAT FEATURES AND THEIR PROPER USE5.1 5-Point HarnessCarry HandleCanopyHandle Release ButtonHarness ClipVehicle Belt Path/Hook

215.0 FEATURES5.2 Rear view of Adjustable Back ModelHarness SlotsAdjuster KnobCanopySeat Angle IndicatorHarness BeltOwner’s Manual HolderBelt Adjuste

5.0 FEATURES225.3 Rear View of Fixed Back ModelHarness SlotsCanopySeat Angle IndicatorHarness BeltOwner’s Manual HolderBelt Adjuster PlateBase/Stroll

235.0 FEATURES5.4 BaseAttachment LocksLatch ConnectorsWebbing Release ButtonLatch Hook Release ButtonLatch Attachment HookBelt Path for Vehicle Belt

245.0 FEATURESYour Safety Seat base can be installed with either the vehicle belt or with the included LATCH attachment system.To properly install th

255.0 FEATURES5.5 Use of the Safety Seat with the Base• To remove the car seat from the base, squeeze the Base Release handle, located below the fo

265.0 FEATURESSeat Angle IndicatorCORRECTWRONG20 pounds(9 kg) and under 20 to 30 pounds(9 to 13.6 kg)Locking ClipSeat Angle Adju

275.0 FEATURES5.7 Operation of the Carry Handle• The Carry Handle has three positions: the upright carry position, a mid-storage position, and the

285.8 Attaching the CanopySlip the canopy stays through the sleeves on the canopy.The canopy is attached by inserting the ends of the canopy plastic

295.0 FEATURESTo adjust the seat back height, turn the moving back adjuster knob behind the seat clockwise to increase the seat back height and counte

USING INFANT RESTRAINT ... 346.1 Securing your Child in the Safety Seat / Carr

5.0 FEATURES30straps to be even with or just below your child’s shoulders. (Fig. 30-1) The harness straps are adjusted as follows:1. Remove the Safet

315.0 FEATURESAdjuster Plate. From the front of the seat, pull the Harness Straps through the shoulder area slots and seat pad.6. Using the included

5.0 FEATURES3210. Before using the Safety Seat, please pull on the Harness Straps from the front to ensure that they are securely reattached.Adjustmen

335.0 FEATURES2. The length of the crotch strap is shortened by wrapping additional strap material around the metal clip. The length is increased by

34USING INFANT RESTRAINT6.1 Securing your Child in the Safety Seat / CarrierIn a crash, the safety seat provides no protection for your child unless

356.0 INFANT RESTRAINT2. The clothing you dress your child in will affect the proper use of the Safety Seat. Please dress your child in clothing that

6.0 INFANT RESTRAINT366.2 For the 5-Point Harness• Type A: Put the two buckle tongues together, overlaying the left buckle tongue onto the right buc

377.0 INSTALLATIONAccessory products for use with the Safety Seat are acceptable for use provided that they do not interfere with the harness assembly

7.1 Preparation1. Park your vehicle on a level surface so that the level indicator located on the left side of the Safety Seat will properly indicate

7.0 INSTALLATION395. Check that the vehicle seat back is locked in the upright position and will not fold forward onto the Safety Seat. (Fig. 39-1)7

1.0 WARNINGWARNINGS TO ALERT YOU TO POSSIBLE DANGERSThe ultimate safety of your child depends on the proper installation of the Safety Seat in your ve

through the Safety Seat without the Base.4. Buckle the seat belt being careful that the seat belt is not twisted and is securely latched into the appr

417.0 INSTALLATION6. To tighten a lap belt only:• An automatically retracted lap seat belt is tightened by feeding belt back into its retractor while

8. A lap/shoulder combination seat belt with a buckle that can slide freely along the seat belt may require the use of a locking clip. (Fig. 42-2) C

437.0 INSTALLATION9. If you are using the Base, check that nothing is on top of the base, or anything that will interfere with the proper latching of

1. Locate a LATCH seating position as identied in your vehicle owner’s manual. Some LATCH seating positions may require deploying of anchors, or ins

457.0 INSTALLATIONplace. Check that there is no slack in the webbing on both sides of the base and that the base is tightly installed. Fig. 45-2 and

7.4 Setting Proper Recline of the Safety Seat / BaseFor your child’s safety, the Safety Seat must be properly reclined when installed in the vehicle

477.0 INSTALLATION1. Safety Seat with Base: Make sure the vehicle is parked on level ground. Lock the Safety Seat onto the Base and check that the Saf

proper angle of recline, place a rolled towel, or car seat noodle, under the base at the foot end to achieve the correct position. (Fig. 48-1)2. Safe

498.0 FINAL CHECKSFINAL SAFETY CHECKS1. If your child is already in the Safety Seat, check that the harness is properly tted and tight as instructed

2.0 REGISTERHOW TO REGISTER YOUR SAFETY SEAT Please complete the following information regarding this Safety Seat:Model Number : _________________Manu

ADDITIONAL INFORMATION9.1 Using the Safety Seat in an AirplaneThis Safety Seat may be used without the Base in an airplane in the same manner as it i

519.0 ADD’L INFORMATIONDO NOT use lubricants of any kind on any of the components of the Safety Seat and Base, including the buckle and LATCH system.

on Pad. Thread the Harness Straps through Buckle Tongues and Harness-Tie. See section Adjustment of the Shoulder Straps for re-threading of shoulder

SAFETY INFORMATION3.1 About your child • This Safety Seat is designed and tested to accommodate a child of a specic range of HEIGHT and WEIGHT. Us

3.0 SAFETYthe safety of your child. Quick turns, sudden stops, or other maneuvers in avoiding a crash, as well as a crash, can injure your child if n

3.3 About Active Air BagsNEVER PLACE THIS SAFETY SEAT IN A VEHICLE SEATING LOCATION THAT HAS AN ACTIVE AIR BAG. If an Active Air bag inates, it can

3.0 SAFETY3.5 About this Safety Seat• This Safety Seat is constructed of plastic that can deform over time if left with any object in the seat while